Recycled / Solid Polyester Fiber
Recycled Solid Polyester Staple Fiber
We produce recycled solid polyester staple fiber for spinning, nonwovens and technical textiles. We tailor denier, cut length, color and mechanical properties to your production line and end use.
Fiber Built for Processing
Start with the end use. Specify the fiber accordingly.
Solid polyester staple fiber is selected for the behavior it brings to your process and finished material. In spinning, fine counts and suitable cut lengths support yarn development. In nonwovens, the combination of strength, elongation, crimp, finish and length affects opening, carding and web performance.
We produce and supply recycled solid fiber to the grade agreed for your processing method and final application. The technical data sheet defines the approved targets for sampling, testing and repeat production.
Choose the Right Grade
Color and performance for different production needs.
We define each grade by its color, technical properties and intended production process.
Natural-looking base
Recycled raw-white solid PSF for suitable spinning and nonwoven applications. Shade, cleanliness and processing behavior are matched to the agreed sample.
Grade and delivery terms confirmed in the quotation.Brighter appearance
An option when the finished construction calls for a brighter white appearance. Whiteness and other characteristics are specified for the actual grade.
Confirm end-use requirements and reference shade.Shade-led selection
Black and custom-colored recycled fibers for applications where shade, consistency and processing requirements need to be considered together.
Reference shade and production minimum agreed by grade.Applications
Selected for the material you manufacture.
From spinning and needle punching to thermobonded webs, we select fiber around the process and finished product, then qualify the grade in your production trials.
Yarn Spinning
Fine-denier, shorter-cut grades may suit open-end, ring or other spinning systems when the fiber's strength, finish, shade and contamination profile meet the yarn target.
Needle-Punched Nonwovens
Grades for felt, underlay, carpet and technical layers are selected for opening, carding, needling behavior and the required finished-web properties.
Automotive Felts & Insulation
Fiber can be considered for automotive nonwoven blends where the specification addresses mechanical behavior, color, shrinkage and any component-level odor or emission requirements.
Geotextiles & Technical Fabrics
Fiber tenacity, elongation, cut length and processing behavior support web design. Strength, puncture, filtration and durability are verified on the finished geotextile.
Thermobonded Nonwovens & Wadding
Recycled solid PSF can form the main fiber structure in thermobonded webs for suitable wadding, padding and technical nonwovens. When blended with a compatible BiCo low melt binder fiber, heat activates the binder at fiber contact points while solid fibers contribute bulk and structure. The blend ratio, temperature profile, web weight and finished performance are confirmed in a production trial.
Fiber roles: solid PSF provides the main web structure in the described blend; BiCo low melt is the heat-activated binder. The suitable process depends on the material and equipment.
Colors with Purpose
Match the fiber to the appearance and process.
Black, grey and other colors can support products where the fiber shade contributes to the finished look. For color-critical programs, we establish a reference sample and agree how shade variation will be assessed.
Color is only one part of the specification. We specify denier, cut length, crimp, finish, tenacity and elongation together for stable processing on your line.
Technical Starting Points
Give procurement a useful specification.
These ranges guide grade selection. We document the final combination in the technical data sheet and quotation.
Final values, tolerances, color, recycled-content basis, test methods and minimum quantity are confirmed in the grade-specific TDS and offer. Fine or coarse deniers and special shades are evaluated individually.
Quality & Documentation
Specify, sample, verify, repeat.
We agree acceptance criteria for your application before regular production.
Define the grade
Agree denier, cut length, color, finish, mechanical targets and the intended process.
Run a trial
Evaluate a representative sample in the actual spinning or nonwoven line and review performance.
Check each lot
We define each lot’s identification, sampling plan, reported parameters and applicable test documents with you.
Confirm claims
For requests involving OEKO-TEX® STANDARD 100 or GRS, we confirm the relevant certificate scope and, for GRS claims, documentation for the specified grade and shipment.
Request the Right Fiber
Tell us what your line needs.
Send your application, denier, cut length, color, target test values, certification needs, destination and expected volume. We will define and quote a fiber grade for your processing method and final application.
English 
Türkçe